Skip to main content

Summary Reader Response Final Draft: Lithium-Sulphur Batteries

The article “How an accidental discovery made this year could change the world” by Lockett (Apr 2022) explains how the newfound Lithium-Sulphur (Li-S) powered battery could be implemented and change the way we live our lives. Lithium-Ion (Li-ion) batteries have always been the go to choice for a wide range of applications. However, the use of Li-S batteries could end up being revolutionary due to its potential increase in battery lifecycle, as well as being more environmentally friendly to mass produce. Weighing approximately 60% less than Li-ion batteries, and having twice the lifespan, going fully electric in commercial transportation now seems feasible. In addition, Earth being lithium and sulphur rich makes mining resources for lithium-sulphur batteries much more eco-friendly, as well as ensuring that there is a strong supply chain in the industry. However, Engineers and scientists at the University of Drexel, California (USA), are still doing more research to make the use of Li-S batteries possible, due to the current challenge of Li-S batteries being only usable for 1000 charge cycles. Li-S batteries have the potential to revolutionise the way we live, compared to their Li-ion counterparts, and although there is still a long road ahead, these are some of the factors and advantages that are key to making Li-S batteries being used in a wide range of applications.


One of the factors that would make Li-S batteries revolutionary is due to the chemical phase that Sulphur goes through at a certain temperature. This chemical phase is called the monoclinic gamma-phase sulphur. Typically, this phase only occurs at elevated temperatures of 95°C(203°F) and above. Surprisingly, in recent studies at Drexel, chemical engineers have found that it is possible to achieve this phase of sulphur at room temperature, despite only having around 1000 charge cycles as of now, as compared to a Li-ion battery that has around 2000 charge cycles. (Lockett, 2022). However, despite the discrepancy between their charge cycles, a Li-ion battery typically only has a capacity of around 150–200 mAh g-1, while Li-S is a “promising candidate” with an astonishing theoretical specific capacity of 1672 mAh g-1 (Kanno, 2009). An article by the Modern Sciences Team (2022), reports how the prototype sulphur battery at Drexel was able to maintain the monoclinic gamma-phase sulphur in its cathode “that was undergoing thousands of charge-discharge cycles without diminished performance”. Drexel’s Department Chemical and Biological Engineering George B. Francis and Chair Professor Dr. Vibha Kalra stated in a Drexel interview that their goal is to create a new cathode that could be successful in the pre-existing Li-ion electrolyte system, instead of inventing and making industries adopt a new electrolyte (Modern Sciences Team, 2022). The battery capacity advantage allows the considerations of using Li-S batteries in electronic vehicles (EV) as this increase in capacity would mean longer and more efficient travels, with lesser time spent charging the vehicle. All in all, the monoclinic gamma-phase sulphur stops the loss of energy capacity, which plays a huge role in creating a battery that can twice last as long as a Li-ion battery can. 


Another advantage the Li-S batteries have over Li-ion batteries, is the materials that are used to make them. In a comparison that was made on Li-S Energy website, it is stated that the lithium, sulphur and carbon used to make Li-S batteries are significantly lighter compared to the heavy metal oxides used in Li-ion batteries. This difference is crucial, as lighter batteries would mean more usage in applications such as EVs, personal devices, medical devices and aircrafts (Li-S Energy, n.d.).


The materials that are used to create Li-S batteries are also a key factor that would make Li-S batteries superior over their Li-ion counterparts. In our present day, the cathodes that are in Li-ion batteries consist of mostly nickel and cobalt. Apart from the rising costs of mining these resources, it also comes with environmental deficits. In the article “Explainer: Cost of nickel and cobalt used in electric vehicle batteries”, it states how “cobalt metal on the London Metal Exchange is trading at four-year highs around $71,000 a tonne” and “Shortages of nickel have fuelled a rally that took prices to $24,435 a tonne last month, the highest since August 2011” (Desai, 2022). Being the top producer of nickel, Indonesia leaves behind a detrimental amount of carbon, and with cobalt being a by-product of nickel, the government is bound to step in and place restrictions on producing nickel when concerns of disposing waste arise. On the other hand, the abundance and relatively lower costs of producing sulphur comes with more economical advantages when Li-S batteries are commercialised more throughout the world (Gifford and Robinson, 2020). The abundance of sulphur on earth means that the harsh impacts on the world’s ecology will be reduced, as producing sulphur has low carbon emissions (Lockett, 2022). In addition to being eco-friendly, the abundance of sulphur also means that the production of sulphur helps to maintain a strong supply chain in the industry, which helps prevent prices from spiking up in the market.


However, even with such shocking discoveries and findings, scientists have yet to find a way to fully implement Li-S batteries in our lives as of now. Scientists are still trying to figure out the mechanics behind the monoclinic gamma-phase of sulphur, both the how and why are still currently being answered. Professor Cairns from Lawrence Berkeley National Laboratory, mentioned in an interview that “electric vehicle batteries ‘are several years away – we need further development and large size scale up” (James, 2013). Another abstract that Professor Cairns has written, states that the difficulties faced in maintaining Li-S batteries’ capacity and having subpar rate capabilities are “preventing the practical application of this attractive technology” (Song, Zhang, Cairns, 2013).


In conclusion, there is no doubt that the advancements and discoveries made on Li-S are beginning to prove that it is potentially revolutionary, having so many commercial and ecology advantages over its Li-ion counterparts. However, there are still too many unanswered questions and challenges that scientists and engineers are facing, though it is highly possible now that we can see such technological advancements being implemented in our daily lives in the near future. Although, it seems that these discoveries that are being made are bringing us a step closer to making Li-S commercially ready. Having a higher energy capacity, being lighter in weight and more cost efficient, Li-S batteries could end up changing the way we live our lives. 



References


Emily James (December 2013) Lithium–sulfur batteries ready to go the distance. ChemistryWorld


https://www.chemistryworld.com/news/lithium-sulfur-batteries-ready-to-go-the-distance/6858.article


Li-S Energy (n.d.) Lithium Sulphur Key Advantages


https://www.lis.energy/site/li-s-energy-applications/lithium-sulphur-key-advantages


Min-Kyu Song, Yuegang Zhang,  Elton J. Cairns (November 2013) A Long-Life, High-Rate Lithium/Sulfur Cell: A Multifaceted Approach to Enhancing Cell Performance. ACS Publications

https://pubs.acs.org/doi/abs/10.1021/nl402793z

Modern Science Team (March 2022) “Gamma Sulphur” May Hold the Key to Future Lithium-Sulphur Batteries

https://modernsciences.org/gamma-sulfur-may-hold-the-key-to-future-lithium-sulfur-batteries/#:~:text=Technically%2C%20this%20rare%20form%20of,temperature%20environments%20in%20laboratory%20settings.

Pratima Desai (February 2022) Explainer: Costs of nickel and cobalt used in electric vehicle batteries. Reuters

https://www.reuters.com/business/autos-transportation/costs-nickel-cobalt-used-electric-vehicle-batteries-2022-02-03/

R. Kanno (2009) Secondary Batteries – Lithium Rechargeable Systems | Electrolytes: Solid Sulphide

https://www.sciencedirect.com/topics/engineering/battery-capacity#:~:text=The%20battery%20capacity%20of%20the,intercalation%20into%20transition%20metal%20oxides.

Stephen Gifford, James Robinson (July 2020) Lithium-Sulphur batteries: Advantages. Faraday Insight 8


https://www.faraday.ac.uk/lis-advantages/


William Lockett. (April 2022) An accidental discovery could change the world. Freethink


https://bigthink.com/the-future/lithium-sulfur-batteries/?utm_medium=Social&utm_source=Facebook&fs=e&s=cl&fbclid=IwAR1JQ-VrPK4Nt6YauDpwVZrmkeHE1jR0zfHdUdqe1wC5xr4XEabacCNVJLE#Echobox=1658939001-1


Comments

Popular posts from this blog

Formal Self-Introduction Letter

Dear Prof Brad, I would like to take this chance to introduce myself, I am Meng Kiat, but all of my friends call me Meng for short. I graduated from Nanyang Polytechnic in the year 2020, having completed the diploma in aerospace and aeronautical technology as my course of study. I have had an interest in the world of aerospace since I was a kid back in primary school. I got fascinated by aircrafts and the big engines that run them when my dad brought me to Changi beach to watch aeroplanes fly over our heads at the jetty. I decided to take up mechanical engineering at SIT as I saw it as an opportunity to study a broader and wider range of subjects and topics related to engineering, as aerospace engineering is quite a niche field. Mechanical engineering is a platform for me to expand my knowledge as an engineer in different fields as there are a couple of specialties for us to get elected in. However, I am still working towards being an aerospace engineer in the future as my career. Bein

Task 3: The importance of communication skills for engineers

29 August 2022 “Communication skills are an essential component in the education of engineering students to facilitate not just students’ education but also to prepare them for their future careers.” Marc Riemer, Faculty of Engineering, Monash University (2007) According to Marc Riemer, Faculty of Engineering, Monash University (2007), communication skills for engineering students are important because it enables the students to prepare for their careers. - Edited 5 September 2022

Design Summary Draft 1: Lithium-Ion Batteries

  The article “How an accidental discovery made this year could change the world”, The Future (April 2022) explains how the newfound Lithium-Sulphur (Li-S) powered battery could be implemented and change the way we live our lives. Lithium-Ion (Li-ion) batteries have always been the go to choice for a wide range of applications, however, the use of Li-S batteries could end up being revolutionary due to its increase in battery lifecycle, as well as being more environmentally friendly to mass produce. Weighing approximately 60% less than Li-ion batteries, and having twice the lifespan, going fully electric in commercial transportation seems feasible. In addition, Earth being lithium and sulphur rich makes mining resources for lithium-sulphur batteries more eco friendly. Engineers and scientists at the University of Drexel, California (USA), believe that Li-S batteries have the potential to revolutionise the way we live, compared to their Li-ion counterparts, and these are some of the fact